How Much Extra Tile Should You Buy?
Buy 10 percent extra tile for a straight layout and 15 percent for diagonal or herringbone. See why, when to go to 20 percent, and how to count boxes.

Skip the arithmetic. Enter your measurements and get quantities in imperial or metric units.
Open the Tile CalculatorBuy 10 percent more tile than the measured area for a straight layout in a simple room, and 15 percent more for diagonal or herringbone patterns.
Waste allowance by layout
| Situation | Add |
|---|---|
| Straight grid, rectangular room | 10% |
| Brick or offset pattern | 10–15% |
| Diagonal layout | 15% |
| Herringbone | 15–20% |
| Large tiles in a small or awkward room | 15–20% |
Where the extra goes
- Edge cuts. Every row ends at a wall. The offcut is often too small or the wrong shape to use again.
- Angled cuts. On a diagonal, every perimeter tile is cut to a triangle, and most of the offcut is waste.
- Breakage. A few tiles crack in transit or snap while being cut.
- Obstacles. Pipes, door frames and toilets need shaped cuts that sometimes fail.
Why large tiles waste more
With a 24 inch (600 mm) tile, one bad cut loses 4 square feet (0.36 m²). In a small bathroom, a high share of the tiles touch an edge, so a high share are cut. Small tiles and mosaics lose less per mistake.
Keep spares on purpose
Tiles are made in batches, and shade and size shift slightly between them. If a tile cracks in five years, a new box may not match. Keep at least a few full tiles from the original batch, stored flat and dry.
Buy it all at once, from one batch
Check that every box shows the same batch or lot number and shade code before you open them. Most shops accept unopened boxes back, so over-ordering by a box is low risk. Running out mid-job is not.
From tiles to boxes
Tile is sold by the box, and each box states its coverage. Work out the area with waste, divide by the coverage per box, and round up.
Example: an 80 sq ft floor plus 10 percent is 88 sq ft. If a box covers 10 sq ft, buy 9 boxes. In metric, 7.2 m² plus 10 percent is 7.92 m². If a box covers 0.9 m², buy 9 boxes.
Work out your room
The tile calculator takes the room size, tile size and layout, and gives the number of tiles and boxes with the allowance included.
Skip the arithmetic. Enter your measurements and get quantities in imperial or metric units.
Open the Tile CalculatorMonthly home energy tips
One email a month with our new guides, a free calculator to try and the latest electricity prices. Unsubscribe any time.
The signup form is provided by Hostinger Reach and loads when you click. You confirm by email before you get anything. Privacy policy.


