Solar Generator Calculator
List what you want to run and for how long, and see the battery capacity and power output a solar generator needs.
How the sizing works
- Daily energy. For each device: watts × hours a day × how many. Add them up to get watt-hours (Wh) per day.
- Backup days. Multiply the daily total by the number of days you want to cover.
- Losses. Divide by the usable share. Turning stored battery power into household AC power loses energy, and about 85 percent is a fair planning figure.
- Output. Add the watts of everything that could run together, then add 25 percent headroom so the unit is not working at its limit.
capacity (Wh) = (sum of watts × hours × quantity) × days ÷ usable share
Example: the default list (lights, a router, phones, a laptop, a fridge and a fan) uses about 2,313 Wh a day. For one day of backup at 85 percent, that needs about 2,720 Wh of battery.
Reading the labels
- Look for watts (W) on the device or its charger. If only volts and amps are given, multiply them: 12 V × 1 A = 12 W.
- A power station is sold by capacity in watt-hours (Wh) and by continuous and surge output in watts (W).
- Solar panels recharge the battery. How fast depends on the panel watts, the sunshine and the unit's charge input limit.
Common questions
What size solar generator do I need?
Add up the watt-hours you use in a day (watts times hours for each device), multiply by the number of days you want to cover, then divide by the share of the battery you can actually use after inverter losses, usually about 85 percent. Check that the output in watts covers everything you will run at the same time.
What is the difference between watts and watt-hours?
Watts are the rate at which a device draws power at a moment. Watt-hours are energy over time: a 100 watt device running for 3 hours uses 300 watt-hours. A power station is rated in watt-hours for how long it lasts and in watts for how much it can run at once.
Why is the suggested capacity higher than my daily use?
Converting battery power to household AC power loses some energy, and most makers advise against draining a battery completely. The calculator divides by the usable share you choose to cover that.
What about fridges and pumps?
Motors such as fridge compressors and pumps draw a short start-up surge, often two to three times their running watts. Check that the surge (peak) rating of the unit covers it. For a fridge, enter the hours the compressor actually runs, not 24.
Monthly home energy tips
One email a month with our new guides, a free calculator to try and the latest electricity prices. Unsubscribe any time.
The signup form is provided by Hostinger Reach and loads when you click. You confirm by email before you get anything. Privacy policy.