Paint Calculator
Find the paint and primer a room needs after doors and windows are taken off, for one or two coats.
How the paint calculation works
- Wall area. Add the four wall lengths (the room perimeter) and multiply by the wall height.
- Openings. Subtract a standard area for each door and window.
- Coats. Multiply the remaining area by the number of coats.
- Paint. Divide by the coverage figure on the can, then round up to whole cans.
gallons = ((2 × (length + width) × height) − doors × 20 − windows × 15) × coats ÷ coverage
litres = ((2 × (length + width) × height) − doors × 1.9 − windows × 1.4) × coats ÷ coverage
Example: a 12 ft × 10 ft room with 8 ft walls has 352 sq ft of wall. Less one door and one window leaves 317 sq ft. Two coats at 350 sq ft per gallon need 1.81 gallons, so buy 2 gallons.
Example: a 3.6 m × 3 m room with 2.4 m walls has 31.7 m² of wall. Less one door and one window leaves 28.4 m². Two coats at 10 m² per litre need 5.7 litres, so buy a 5 litre and a 1 litre tin (shown as “5 L + 1 L”).
Standard deductions
| Opening | Imperial | Metric |
|---|---|---|
| Interior door | 20 sq ft | 1.9 m² |
| Average window | 15 sq ft | 1.4 m² |
Typical coverage by surface
| Surface | sq ft per US gallon | m² per litre |
|---|---|---|
| Smooth, previously painted wall | 350–400 | 10–12 |
| New drywall or bare plaster, unprimed | 250–300 | 6–8 |
| Textured wall or ceiling | 250–300 | 6–8 |
| Primer on a porous surface | 200–300 | 5–7 |
Paint makers quote coverage for smooth, sealed surfaces. US labels use square feet per US gallon and UK and EU labels use square metres per litre; the usual label figures differ a little between the two markets, so always check your own can. Primer here is estimated at 250 sq ft per gallon (6 m² per litre).
Before you buy
- Measure each wall if the room is not a simple rectangle, add the areas, and compare with the wall area shown above.
- Trim, doors and skirting or baseboards take a different paint. This calculator covers walls and ceilings only.
- Mix cans of the same colour together in one bucket before you start, so the colour is even across the room.
Common questions
How much area does a gallon of paint cover?
Most interior wall paints cover 350 to 400 square feet per US gallon on smooth, primed walls. Rough, textured or unprimed surfaces can cut that to 250 to 300 square feet.
How much area does a litre of paint cover?
Most interior emulsions cover 10 to 12 square metres per litre on smooth, sealed walls. Bare plaster and textured surfaces take more paint, so expect closer to 6 to 8 square metres per litre.
Do I need two coats?
Usually yes. Two coats give an even colour and a tougher finish. One coat can be enough when you repaint in the same colour with a good quality paint over a sound surface.
When do I need primer?
Use primer on new drywall or bare plaster, over patched areas and stains, when you go from a dark colour to a light one, and when you change from oil-based to water-based paint. Previously painted walls in good condition often do not need it.
Should I subtract doors and windows?
Yes, for a closer figure. The calculator takes off 20 square feet (1.9 square metres) for each door and 15 square feet (1.4 square metres) for each window. If your openings are much larger, add more to the count.
Should I buy extra paint?
The result is already rounded up to whole cans. Keep the leftover for touch-ups, because a later batch of the same colour can differ slightly.
Monthly home energy tips
One email a month with our new guides, a free calculator to try and the latest electricity prices. Unsubscribe any time.
The signup form is provided by Hostinger Reach and loads when you click. You confirm by email before you get anything. Privacy policy.