Skip to content
GableGreens

Home Improvement

Deck Board Spacing: What Gap to Leave and Why

Most deck boards need a gap of 1/8 to 1/4 inch (3 to 6 mm). Learn how timber moisture and composite expansion change the gap, and how it affects board count.

Save to Pinterest (opens Pinterest in a new tab)

Illustration of deck boards fixed to joists with even gaps, a spacer tool in one gap and a cordless drill

Skip the arithmetic. Enter your measurements and get quantities in imperial or metric units.

Open the Deck Board Calculator

Leave a finished gap of about 1/8 to 1/4 inch (3 to 6 mm) between deck boards. The gap lets rain drain, lets air dry the frame underneath, and gives the boards room to swell.

Gap by board type

Board Gap when laying Why
Dry timber (kiln-dried or seasoned) 1/8–1/4 in (3–6 mm) It will swell a little in wet weather.
Wet pressure-treated timber Tight, or a very small gap It shrinks as it dries, opening the gap by itself.
Composite or PVC As the maker specifies It expands with heat, mostly along its length.

UK guidance for timber decking commonly gives 5 to 8 mm. Whatever the board, the maker’s installation guide takes priority, and ignoring it can void the warranty.

How to tell if timber is wet

Freshly treated boards feel heavy and cool, and may be damp to the touch. If in doubt, assume they are wet. Boards laid wet with a wide gap can end up with gaps of half an inch (12 mm) or more once dry, which catch heels and chair legs.

Composite boards: mind the ends

Composite boards move mostly in length as the temperature changes. Leave the end-to-end gap the maker specifies where two boards meet and where a board meets a wall. That gap often depends on the temperature on the day you install.

Keeping gaps even

  • Use spacers: purpose-made deck spacers, or nails or screws of the right thickness.
  • Check the distance to the far edge every few rows and adjust slightly, so the last board is not a thin strip.
  • Hidden-clip systems set the gap for you.

How the gap changes the board count

Each row takes up one board width plus one gap. On a 10 ft (3 m) wide deck:

Board width Gap Rows
5.5 in None 22
5.5 in 1/8 in 22
5.5 in 1/4 in 21
120 mm 5 mm 24
144 mm 5 mm 21

The gap rarely changes the order by more than one row, but board width changes it a lot. Always enter the board’s actual width, not its trade name.

Count your boards

The deck board calculator takes your deck size, board width and gap, and returns the rows, boards, joists and screws with a waste allowance.

Skip the arithmetic. Enter your measurements and get quantities in imperial or metric units.

Open the Deck Board Calculator

Monthly home energy tips

One email a month with our new guides, a free calculator to try and the latest electricity prices. Unsubscribe any time.

The signup form is provided by Hostinger Reach and loads when you click. You confirm by email before you get anything. Privacy policy.

Founder and editor, GableGreens

Muslam Uddin founded GableGreens to put plain answers and the working behind them in one place. Every guide is researched from government agencies, standards bodies and manufacturer documents, and the sums are checked before it is published. The guides are not professional advice: where a job needs a licensed electrician or engineer, the guide says so. How we research and write.