Skip to content
GableGreens

Home Improvement

How Much Gravel Do You Need for a Driveway?

A gravel driveway needs 4 to 6 inches of compacted base plus 2 to 3 inches of surface stone. See worked examples in tons and tonnes for common driveway sizes.

Save to Pinterest (opens Pinterest in a new tab)

Illustration of a house with a gravel driveway to the garage and a pile of gravel with a rake

Skip the arithmetic. Enter your measurements and get quantities in imperial or metric units.

Open the Gravel Calculator

Work out the area, decide the depth of each layer, and multiply. A typical home driveway uses 4 to 6 inches (10 to 15 cm) of compacted base stone with 2 to 3 inches (5 to 7.5 cm) of surface gravel on top.

The layers

Layer Material Depth (in) Depth (cm)
Base Graded crushed stone with fines 4–6 10–15
Surface Angular gravel, about 3/4 in (20 mm) 2–3 5–7.5

Soft or clay ground, a slope, or heavy vehicles all call for a deeper base, sometimes with a layer of larger stone underneath. If the ground is poor, get local advice before ordering.

Worked example, imperial

A single-car driveway 40 ft long and 10 ft wide is 400 sq ft.

  • Base at 4 in: 400 × 4 ÷ 12 = 133 cu ft = 4.9 cu yd, about 6.7 tons.
  • Surface at 2 in: 400 × 2 ÷ 12 = 67 cu ft = 2.5 cu yd, about 3.3 tons.
  • Total: 7.4 cu yd, about 10 tons before any allowance.

Worked example, metric

A driveway 12 m long and 3 m wide is 36 m².

  • Base at 10 cm: 36 × 0.10 = 3.6 m³, about 5.8 tonnes.
  • Surface at 5 cm: 36 × 0.05 = 1.8 m³, about 2.9 tonnes.
  • Total: 5.4 m³, about 8.6 tonnes before any allowance.

These use 1.6 tonnes per cubic metre (about 1.35 US tons per cubic yard). Add 10 percent: base stone loses volume when it is compacted, and some surface gravel always ends up in the lawn.

Topping up an existing driveway

A worn driveway usually needs only a new surface layer of 1 to 2 inches (2.5 to 5 cm). Fill potholes with base stone first and compact them, or the new gravel will sink into the same holes.

What changes the cost

  • Delivery distance. Stone is cheap; haulage is not. A nearby quarry often beats a cheaper stone from far away.
  • Load size. One full truck usually costs less per ton than two part loads.
  • Stone type. Local crushed stone is the least expensive. Decorative colours cost more.

Which gravel for the top

Use angular stone on a driveway. Rounded pea gravel rolls under tyres and forms ruts. The reasons are covered in pea gravel vs crushed stone.

Get your own numbers

Run the gravel calculator twice, once for the base depth and once for the surface depth, and order each material separately.

Skip the arithmetic. Enter your measurements and get quantities in imperial or metric units.

Open the Gravel Calculator

Monthly home energy tips

One email a month with our new guides, a free calculator to try and the latest electricity prices. Unsubscribe any time.

The signup form is provided by Hostinger Reach and loads when you click. You confirm by email before you get anything. Privacy policy.

Founder and editor, GableGreens

Muslam Uddin founded GableGreens to put plain answers and the working behind them in one place. Every guide is researched from government agencies, standards bodies and manufacturer documents, and the sums are checked before it is published. The guides are not professional advice: where a job needs a licensed electrician or engineer, the guide says so. How we research and write.